Step 4
Step 5
34
Installation Procedures
Loosely attach support angles (P/N 49436) to three tee plates (P/N 202447) as shown in
Figure 37.
•
Use A-325 ½ x 1-¼ in. bolts, flatwashers and nuts. (see page 12)
•
Install bolts from concave side of reflector
•
Angles should be installed with edge in and flat side away from reflector as shown.
Figure 37
Loosely attach support angles (P/N 49438) from plates E and A to angle (P/N 49436)
from tee plate F with pivot bracket (P/N 300758) as illustrated in Figure 38.
Figure 38
ES45T-R Reflector Assembly
