8
Cleaning and maintenance
•
Switch the appliance off at the mains and unplug from the socket.
•
Ensure the product is fully cool before disassembling. Carry out disassembly
according to ‘disassembly of the juicer’ on the previous page.
•
Wash all removeable components in warm soapy water, rinse thoroughly and
dry.
•
Use the cleaning brush provided to assist with the cleaning of difficult to reach
areas.
•
Please note:
This appliance is not dishwasher safe
•
Do not wash or immerse the base unit of the slow juicer in water. Wipe the
exterior of the base unit with a damp cloth and dry thoroughly.
•
Do not use scouring pads or any other abrasive cleaning utensils to clean the
appliance and its removeable components.
Troubleshooting
Problem
Solution
Appliance not operating
•
Check that the power cord and power
source are connected and switched on.
•
Check that all parts have been assembled
correctly.
Unable to remove the juicing bowl cover
•
Check that all residue is removed in the
juicing bowl. Set the switch to “rev” to
remove any excess debris.
•
Ensure that the “ ” marking is correctly
aligned to the “ ”
Appliance stopped working during operation
•
Check to see if there is too much food
inside the juicing bowl. Press “rev” to
remove excess food from the juicing bowl.
Cut ingredients into smaller pieces and try
again.
Bottom of the juicing bowl is leaking
•
Check that the silicone sealing ring in the
centre of the juicing bowl is correctly in
place and not damaged.
•
Ensure that there is not too much food
being placed into the juicer and causing
the silicon sealing ring to open and leak.