4
Before first use
•
Clean all plates raclette pans and dry thoroughly.
•
During the first 5 uses of the appliance, condition the grill plate/stone by
regularly applying a thin coating of vegetable oil. Cooking oil should be used for
future use to help prevent food sticking to the surfaces and also make the
cleaning process easier.
•
Note:
The grill plates will become darker with use and expansion of the stone
grill plate will open small fissures. This is normal and does not indicate a defect.
•
Note:
When first using the appliance some light smoke may be produced by the
heating elements. This is not uncommon and the smoke is completely harmless.
Allow the product to run for ten minutes to make sure that any residue left on
from the manufacturing process is removed.
How to use
The appliance should be assembled when delivered but parts may become out of
alignment during transit. Check the product assembly before use.
1.
The raclette grill plates/stone is supported above the heating element by a
supporting ring. Ensure the supporting ring is secure in the four fixing locations.
2.
The raclette grill plate is placed on the top of the supporting ring and the 6
location loops are located inside the grill plate edge.
3.
The raclette stone top is placed in the centre of the supporting ring and the 6
location loops will be outside of the edge of the stone preventing movement.
4.
Plug the supply cord into the electrical socket and turn the heat control to max.
The red power indicator will illuminate. Pre
-
heat the raclette for 10 minutes
before use.
5.
Add a thin layer of oil to the raclette grill/stone/raclette pans.
6.
During the preheating time, prepare the ingredients for the raclette pans and
place them into the individual pans.
7.
After the preheating period is over, reduce the heat to the required cooking
temperature. Place the ingredients on top of the raclette and/or place the pans
underneath the heating elements.
8.
If you wish to extend the time it takes to grill on the raclette simply reduce the
temperature by turning the selector knob to your required position.
9.
Be aware that the grill stone will retain heat even when the element
temperature is reduced.
10.
After the required cooking, switch the appliance off and remove the plug from
the socket.
11.
Allow the appliance to fully cool before beginning the cleaning process, refer to
“
Cleaning and maintenance
”.
