4
opening the lid.
The attached base can not be
used for anything other than
its intended use.
Extreme caution must be
used
when
moving
an
appliance
containing
hot
water.
Unplug the kettle from the
outlet when it is not in use
and before cleaning. Allow
the kettle to cool before
putting on or taking off parts
and before cleaning the
appliance.
The kettle can only be used
with the stand provided.
If the kettle is overfilled,
boiling water may spill our
from the sides. Only fill to the
recommended mark.
Position the lid so that steam
is directed away from the
handle.
Do not remove the lid while
water is boiling.
Ensure the kettle is switched
off before removing it from
its stand.
Please do not leave this
appliance unattended when
it is switched on.
Please be aware the body of
the kettle will get hot when
in use and can retain some
heat in the body whilst
boiled water is still inside.
Before first time use
Before
first
time
use,
it
is
recommended that you clean the
appliance by boiling the full kettle
twice and discarding the water.
Directions for use
1. To fill the kettle, remove it from the
base and open the lid by pressing
down on the release button on the
handle.
2. Fill it with the desired amount of
water and close the lid. Do not fill
above the maximum level, or under
the minimum level mark.
3.
Place the kettle on the power base
and connect the plug into the wall.
4. Press the on/off switch to the I
position—at this point, the indicator
