QUICK LAUNCH GUIDE FOR
CAMERAS
Page 1 of 4
STEP 1 - INSTALL THE SOFTWARE
(1) Ensure the PC has a spare USB 2.0 compatible port available before commencing install
(2) Insert the device that contains the software then follow the on-screen instructions.
(3) Note which directory the software installs to, e.g.:
(4) Restart the PC when prompted to do so.
STEP 2 - CONNECT THE CAMERA
With the power turned OFF connect the camera to the supplied Power Supply Unit (PSU), then switch the
power ON and connect the camera to the PC using the supplied USB cable, e.g.:
The Operating System will automatically detect the camera and ask where the software drivers can be found.
Select the directory where the software was installed to.
NOTE: If the camera is disconnected then reconnected to another USB port, you may be prompted
to re- install the driver again. If this happens, select it from the directory indicated in item (3) of STEP 1
above.
STEP 3 - START THE APPLICATION
Click on the
icon on your desktop and the
Solis Splash Screen
appears briefly:
The
Main Window
should then appear, similar to the following:
NOTE: When the application is started for the first time only, a prompt may appear requesting the
location of the driver. Get the driver from the directory indicated in item (3) of STEP 1 above. The
application then needs to be restarted.
