4
/
12
6. Tighten the thumbscrews( ④ ) to hold the microscope in place. If done correctly, you
should be able to turn the focus controller(②) of the microscope freely, while the rest of it
remains in place.
7. Remove the protective film from the display at the top of the microscope.
General use
1. Connect the camera to the power supply via USB cable. Also connect spotlights to the
power supply.
2. Press the “ON/OFF” button on the monitor. (Sometimes the camera will switch on
automatically when it is connected to the power supply)
3. Turn on the spotlights, adjust the “height adjustment” and the “Focus controller” to
get the image that you want.
4. Use the “UP/Down”to do digital zooming.
*To set the menu
1. Press “Menu” until it shows the menu on the built-in screen.
2. Press “UP/DOWN”and “OK” choose what to set.
3. Press “Menu”again after you finish setting.
*To switch mode
1. Press “Mode” shortly.
2. Icons :
:
standby mode;
: capture mode;
: record mode;
: image playback mode
: video playback mode (If the files are videos, press “OK” to play the video file)
: Lock the file which is being recording
*To capture pictures.
Press “Mode”shortly to get into the Capture mode. Press “OK” to take pictures.
* To record a video
1.Press “Mode”shortly to get into the Standby mode. Press “OK”to start recording.
2.Press “OK”again to stop recording.
