DN:KD-926-SMSY01 V1.0 Operation Guide
11/16
can be shown different color according to the systolic pressure and diastolic
pressure. Refer to the “ASSESSING HIGH BLOOD PRESSURE FOR ADULTS”
section.
9. SYNCHRONIZING STORED RESULTS
a. In Clock Mode
, press “MEM” button, the monitor will wait Bluetooth connect and
Bluetooth symbol flashing after confirming the group.
See picture 8-1
.
Bluetooth
symbol will stop flashing when Bluetooth is connected. Send symbol flashing until
Synchronize finished.
See picture 8-3.
Send symbol flashing means it is synchronizing
the memory at this time.
b. If an accident happens, synchronous unfinished, unfinished symbol flashing. See
picture 8-5.
c. When Bluetooth is disconnected, the monitor will turn off automatically after 1 minute
of n
o operation. You can also press the “START/STOP” button to turn off the monitor
manually.
10. DELETING MEASUREMENTS FROM THE MEMORY
When any result is displaying (exclude average value displaying), keeping on pressing
button
“MEM” for three seconds, all results in the current bank will be deleted .
See picture
10.
Press the button
“START/STOP”, the monitor will be turned off.
Picture 10
11. ASSESSING HIGH BLOOD PRESSURE FOR ADULTS
The following guideline for assessing high blood pressure (without regard to age or gender)
has been established by the World Health Organization (WHO). Please note that other
factors (e.g. diabetes, obesity, smoking, etc.) need to be taken into consideration. Consult with
your physician for accurate assessment, and never change your treatment by yourself.