ANDI 5T COBALT2, User Manual

Page: 71 / 154

71
4. To pair with a device in the list, select it.
5. Type the device‟s PIN and then select „OK‟.
6. Once paired, select the device name to connect. You can also touch &
hold the name to open the context menu, and then select Connect.
7. Pairing and connection status appear under the device name.
8. Once the other Bluetooth device shows “connected” status, you can start
using it to make and receive phone calls.
9. To disconnect or unpaired with a device, touch & hold the device to open
the context menu. Select Disconnect or Unpaired, as appropriate. If you
select „Unpaired‟ when connected, you will be disconnected as well.
Note: The phone supports only the headset and hands-free Bluetooth
profiles, so if you try to connect to a device that is not a headset or
hands-
free car kit, then you will receive an “unable to connect” message.
If you pair with a second headset while connected to the first, the first
headset will remain connected. To switch connection to the second headset
you must manually select that headset again after pairing.