English
6
How to configure the Wi-Fi Repeater
You can configure the wireless repeater by connecting it to your
computer/laptop with enclosed RJ45 cable or wirelessly.
Configure the Wireless Repeater wirelessly.
1.
Plug the Wireless repeater to a wall socket.
Open Connect to a Network by right-
clicking the network icon (
or
) in the
notification area. You will find the signal from
the
Wireless Repeater.
Click on ‘
Connect
’
then wait for a few seconds.
2.
Open web browser and type http://192.168.10.1 in the
browser’s address box. This number is the default IP address
for this device.
Note: Please check whether the Wireless Repeater
accord with factory default settings if you can’t download
http://192.168.10.1. If you are still not sure what causes the
problem, you can reset the Wireless Repeater by pressing the
RESET button for a few seconds, then try again.
3.
The login screen below will appear. Enter the “User Name” and
“Password” then click “
OK
” to login. The default User name is
“
admin
” and Password is “
admin
”.
