English
4
Get started:
1. Connect the USB cable between the Micro USB charging port (in) on
the power bank and an output source.
2. The battery power indication in the display will blink during charging.
3. The powerbank is fully charged when the display shows
‘100’
.
4. Unplug the USB cable from the power bank and the power source.
5. Connect the charging cable (out) between the powerbank and your
mobile device (e.g. phone) to begin charging your mobile device.
6. Press the on/off button and the display will be lit during charging.
Note:
The power indication in the display will decrease as the
powerbank uncharges.
7. After charging, disconnect the charging cable (out) and the power
bank will turn off automatically.
Toubleshooting:
Problem
Solution
Display does not light up when
charging
Ensure that the USB cable and
your mobile device are properly
connected to each other.
Ensure that the output source is
powered and connected properly.
Powerbank does not charge
connected unit
Ensure that the charging cable is
properly connected to your mobile
device.
Operation
