English
Svenska
Norsk
12
General Operation
Initial Setup
´
Connect one end of the RF coaxial cable (not included) to the aerial socket on the wall and the other
end of the cable to the RF (75) socket at the rear right bottom view of your TV.
´
Connect the mains cable to the mains socket after you have completed all the connections.
´
Switch on the
POWER ON/OFF
switch which is located at the front right side under the frame. At
this stage, the TV switches to standby mode. The red LED indicator will illuminate on the front panel
of the TV.
´
In standby mode, press the button on the front right side panel of the TV or the button on the
remote control to turn the TV on. The red LED indicator will turn blue.
´
The first time you turn the TV on, it will go straight
into the First Time Installation menu. Press the
/
buttons to select your desired mode setting.
´
Press the
/
/
/
buttons to navigate the menu
and change the settings.
OSD
Language
Selects your desired language to be displayed on the menu. The default on-
screen menu language is set to English.
DVB Select Type
Select DVB Type
Country
Selects the country where you will operate the TV. The default country is set to
Sweden.
Tune Type
Selects the tune type: ATV+DTV/DTV/ATV.
OK
Press the OK button to start auto tuning.
Channel Tuning will commence. This
operation may take up to several minutes.
The display will show the progress of the
tuning and the number of channels found.