48
Operator's Manual – Self-loading Trailer
Anderson Group
Component
Function
4
Moves the cursor to the next function in manual mode (see "Operations in
manual mode" on page 61).
Moves the cursor from top to bottom when adjusting the date and time.
5
Returns the screen to the previous menu.
The hydraulic control levers located on the side of
the trailer must never be used to manoeuvre the
trailer. They are only used for diagnostics and
troubleshooting.
See chapter 6 Troubleshooting to learn which part is
activated by each hydraulic lever.
The control screen has two menus: the main menu and the settings menu. When the control screen
comes on, the main menu is displayed. To access the settings menu, press
.
5.1.1 Main menu
The control screen main menu (see Figure 17) is used to select the trailer mode. In this menu, you
can also specify the orientation of the bales to be loaded (vertical or horizontal).
In the main menu, you can also access the settings menu and activate the emergency stop.
Figure 17 — Main Menu on the Control Screen
Table 8 describes the various options in the main menu.
