44
Operator's Manual – Self-loading Trailer
Anderson Group
4.5 Adjusting the front stopper
The front stopper secures the bale that is on the top level and opposite the loading arm. The stopper
must be adjusted to the dimensions of the bales being transported.
To adjust the height of the stopper, remove the bolt and put the stopper in the desired position (see
Figure 14 and Table 6).
Figure 14 — Adjusting the Front Stopper
Table 6 — Position of the Front Stopper Based on the Diameter of Bales
Position
Bale diameter
A
1.2 m (4 ft.)
B
1.35 to 1.5 m (4.5 to 5 ft.)
