Turn on the computer.
1) Pull the emergency stop button (1), the blue
light (2) will come on.
2) Press the power button on the remote (3),
when the screen is ON push the power button
(3) again
3) Make sure the M.C. LED light (4) on the
receiver’s control panel is ON.
QUICK START GUIDE
800HS
Starting and Aligning the wrapper
1) If equipped with an Honda engine, put the
ignition key in the ON position and press the
start engine button on the remote.
2) Before wrapping you need to align the
wrapper, press the alignment key (5) on the
remote control.
3) When the alignment menu appears on the
remote control screen, press the same key (5)
a second time, the alignment will start and the
screen should display
Alignment in progress
(it
can take up to 2 minutes).
Receiver
Remote
Emergency control box
1
2
3
4
5
Start Wrapping
1) Make sure the blue button’s light (2) is on,
which means that the alignment is finished.
2) Push the wrap key (6), the wrapper’s table will
make the set number of rotation and
unloading will happen automatically, and will
engage the plastic cutter.
3) If the remote is not charged or missing you can
wrap automatically by pressing the blue
button (2).
6
Honda engine
The 800HS is powered by an Honda
engine. Before starting the machine
make sure it has gas and oil in it. Also
when traveling or not using the
machine for a long period of time don’t
forget to close the fuel valve, located
beneath the choke on the right side of
the engine.
Fuel valve
