Auto search
1
）
Turn on the TV device you want to control.
2
）
Hold down “Setup” and “Enter” keys for about 3 seconds until LED lights and
remains on, release all keys.
3
）
Press and release “POWER,” LED will blink one time & keep lighting on, every 2
seconds it will send the codes of POWER (or MUTE if no POWER code) one by
one. If to press CH+ / CH- can change the searching direction.
4
）
When TV device turns off, press “S” button to save and exit, LED will go out to
save the code & exit
Code Display
1.
Press and release keys “Mute” and “1” simultaneously, then release. The LED
flashing times represents the current code first digit.
2.
Press and release keys “Mute” and “2” simultaneously, then release. The LED
flashing times represents the current code second digit.
3.
Press and release keys “Mute” and “3” simultaneously, then release. The LED
flashing times represents the current code third digit.
4.
Press and release keys “Mute” and “4” simultaneously, then release. The LED
flashing times represents the current code fourth digit.
If current digit is 0, the LED will not flash
.
Reset to Factory Default Status
1. Hold down “Setup” and “Enter” keys for about 3 seconds until LED lights and
remains on, release all keys.
2. Input code
9 9 9 6
.
3. LED turns off directly after 4 digits input. Now remote is reset to factory default
status.
