Anderic RR1001, Instruction Manual

Page: 3 / 13

Resetting the Remote to Factory Default
1. Press and hold the SET and POWER buttons simultaneously for 3
seconds; the indicator light shall remain on; then release the buttons.
2. Press the CC button and the light shall flash 3 times. Remote is now
reset to its factory settings.
Setting the Sleep Timer:
NOTE: The SLEEP button operates the Sleep function of your TV providing it
supports the Sleep function. Alternatively, you can enable the remote to turn
off your TV after a period of 1 to 99 minutes. The instructions are provided in
this section. This feature works even if your TV does not have its own Sleep
function.
•
First make sure you have your remote is programmed to your TV.
•
After successfully programming your remote, try pressing SLEEP
button first and make sure on screen sleep option DOES NOT appear
before continuing. If it does appear then you do not have to continue
with the following steps.
1. Press and hold the SLEEP button until the indicator light blinks and
remains on. Then release the button.
2. Using the numerical pad, press numbers keys 01 - 99 depending on the
number of minutes you would like before the TV turns off. If you press 0
then 1 the TV will turn off in 1 minute. Indicator light will turn off to
confirm. TV Sleep Timer is now set.
3. Leave the remote pointing towards the TV with an unobstructed path.
Remote will now turn the TV off when the number of minutes inputted
has been reached.
NOTE : To Cancel, press and hold the SLEEP or POWER button for 3 seconds.
Pressing any other additional buttons on the remote will not cancel the sleep
timer.
Setup Key Lock
1. Press and hold the SET and POWER buttons simultaneously for 3
seconds; the indicator light shall remain on; then release the buttons.
2. Press MUTE key four times and the indicator light shall flash five times,
now the remote is locked.
NOTE: If to UNLOCK the remote, repeat the above steps.