SET UP DEHUMIDIFIER FOR INSTALLATION
IMPORTANT:
Cut the strap securing the compressor shipping
support bracket and remove the strap, shipping bracket screws, and
bracket� See
FIGURE 1
�
LOCATION CONSIDERATIONS
• Allow sufficient clearance for filter removal and
to prevent airflow obstruction
• Electrical service access will require the removal
of the side panel shown� Allow sufficient space
for service on this side of the unit�
• Always install the dehumidifier in a condensate
pan when locating in or over a finished space�
CLIP OFF
PLASTIC STRAP
REMOVE SHIPPING BRACKET
REMOVE AND
DISCARD
SHIPPING BRACKET
AND STRAP
BEFORE ST
AR
T UP
.
TOP VIEW
FILTER
MINIMUM
CLEARANCE FOR FILTER
(EITHER SIDE)
13"
6" MINIMUM CLEARANCE
FOR PROPER AIR FLOW
ELECTRICAL SERVICE
ACCESS THIS SIDE
6 FT. POWER CORD
90-1944
90-1945
FIGURE 1
– REMOVE SHIPPING BRACKET
FIGURE 2
– FILTER ACCESS CLEARANCE
3
