background image

FEATURES

Control

Onboard digital with diagnostics

Air supply orientation

Horizontal

Filter

20"x22"x2" MERV 11

Refrigerant

R410A

Coil type

Copper tube, Aluminum fin  
with ElectroFin

®

 E-coat

Drain connection

*

¾" FNPT

P-Trap required

Yes (Included)

Leveling feet

Sold separately (Model #5789)

Hanging brackets

Included

Duct Kit

Sold Separately (Part #5807)

Warranty

5 Years on all parts including  
refrigeration system

Requires drain trap

SPECIFICATIONS

Capacity

(1)

 PPD AT 80°/60%RH

320

Energy factor

(1)

2.9 L/kWh

6.0 pints/kWh

Voltage, Phase, Frequency

208–240VAC, 1 Phase, 60 Hz

Current draw

 

(amps)

(1)

11.1

Power (watts)

(1)

2,310

Btu/h

(2)

7,900

Power cord type and length

SJT, 6-20P, 10ft

Hardwire

Field-configurable

Breaker size

20 amp

CFM

830

Dimensions:

Width: 32⅝"
Height: 24"
Length: 24¼"

Weight

180 lbs.

Operating range Temp/RH

60/50 to 85/80

(1)

Rated capacity and energy factor test done and current draw measured in accordance 

with AHAM DH-1 2008 at 80°F/60% RH inlet air at 0.0 ESP, 208 VAC. 

(2)

Total cooling load @ 

80°F/60% RH.

PRINCIPLE OF OPERATION

The Anden Model A320V1 Dehumidifier is designed to dehumidify 
the air coming into the unit by passing the incoming air over an 
evaporator coil to drop the air temperature below the dew point of 
the air. Moisture is removed from the air and drained out of the unit 
to a common floor or waste drain. The air is then reheated in the 
condenser coil and exits the unit.

Dehumidification occurs until the set point is reached, then shuts 
off until the control determines a need for operation.

APPLICATION

The Anden Model A320V1 Dehumidifier is the perfect solution  
for the precise management of humidity required in an indoor 
growing environment. 

High-Capacity Grow-Optimized 

Dehumidifier

Model A320V1 | Specification Sheet

INCLUDED ITEMS

Control

Model A77

Drain fittings

¾" MNPT x ¾” BARB,  
¾" MNPT x ¾” Female pipe,  
¾" FNPT x ¾” Female pipe,
¾" P-Trap

Drain tubing (length, ID)

10' – ¾" ID

Thermostat wire

30’ 20 gauge 4-wire

MODEL A77

Dedicated monitoring and control of 
each dehumidifier at canopy height

INCLUDED CONTROL

MODEL A77 SPECIFICATIONS

Electrical

Input voltage

and current

Voltage: 35VDC (supplied by
dehumidifier control board)

Output

Communication (RS485)

Control

Control range

35%–80% RH

Accuracy

+/-5% RH

Differential

3% RH

Low limit

40°F dew point

High limit

99°F dry bulb

Reviews: