4
Operating environment
Adequate ventilation is required to provide proper cooling for the MIG machine. Ensure that the
machine is placed on a stable level surface where clean cool air can easily flow through the unit.
The MIG machine has electrical components and control circuit boards which will be damaged by
excessive dust and dirt, so a clean operating environment is essential.
Block Diagram
Installation procedure for HF TIG
1) Connect machine with 220V single phase power supplies and proper shield gas source.
2) Then connect TIG torch quick connector to the negative output terminal, gas cable to quick-gas
connector, and aviation plug to aviation socket
3) Then connect earth clamp quick connector to the positive output terminal.
INPUT
CONTROL
