29
28
Hit the screen of figure 2-1
Check the motor of the Capsule Dispenser
Check the input
VDC to the motor
repalce the mirco
switch or the motor
repalce I/O board
repalce the mirco
switch
repalce I/O board
Check the
mirco switch
2) When the Capsule Dispenser ass’y does not work,
Hit the screen of figure 2-1
Check the motor of the Capsule Dispenser
Check the input
VDC to the motor
repalce the mirco
switch or the motor
repalce I/O board
repalce the mirco
switch
repalce I/O board
Check the
mirco switch
NO
12V
not 12V
NO
OK
OK
A/S MODE
Mode for checking Capsule Dispenser Ass’y.
• You can move on to the next Mode by pushing the Test Button as shown below.
( Note : in advance check whether DIP swith is on the prize mode before the following steps )
1) Normal condition
• When you hit the screen, the Capsule Dispenser in the Bill Board starts working. Then it stops
working by tuching the Micro Switch to the Capsule Dispenser.
figure 2-1
6-2
Summary of Contents for HAMMER DX
