E-13
Using the Monitor
Transmitting Temporarily Stored Data
In cases when the receiver device cannot receive measurement
data, the measurement data is temporarily stored in the monitor
memory. The data stored in the memory is transmitted the next
time a connection is successfully made to the receiver device.
A total of 30 sets of measurement data can be stored. When the
amount of data exceeds 30 sets, the oldest data is deleted and
the new data is stored.
Time
This monitor has a built-in clock. The date and time a measurement
was taken is included in the measurement data. The built-in clock is
designed to be automatically adjusted by syncing with the clock of
a receiver device. Refer to the specifications of the receiver device.
This monitor has no clock adjustment function.
Selecting the correct cuff
Using the correct cuff size is important for an accurate reading. If
the cuff is not the proper size, the reading may yield an incorrect
blood pressure value.
The arm size is printed on each cuff.
The index
p
and proper fit range, on the cuff, tell you if you are
applying the correct cuff. Refer to "Applying The Arm Cuff".
If the index
p
points outside of the range, contact your local dealer
to purchase a replacement cuff.
The arm cuff is a consumable. If it becomes worn, purchase a
new one.
