20
The thermometer automatically displays the current measurement temperature if no operation is
made for 30 seconds while on the maximum or minimum temperature display
To check the maximum and minimum temperatures for a new measurement, reset the memory
before starting the measurement as described in “Resetting the maximum and minimum
temperatures stored in memory” below.
CAUTION
The maximum and minimum temperatures stored in memory are reset automatically
when the battery is removed from the thermometer.
Resetting the maximum and minimum temperatures stored in memory
To reset the maximum and minimum temperatures stored in memory, perform the following:
Press the [MAX/MIN] button to display the maximum or minimum temperature. Press the [MAX/MIN]
button again and hold it for more than two seconds. The display goes
into the bar display, and both the maximum and minimum temperatures
stored in memory are reset to store new maximum and minimum
temperatures.
About the auto power off function and turning the power off
Auto power off function
The thermometer has the auto power off function.
The auto power off function is disabled when the battery is replaced
.
To enable the auto power off function
,
press the
[AUTO OFF] button one time. The “AUTO”
appears at the upper right in the display to show that the auto power off function is now enabled.
With the auto power off function, the thermometer automatically turns the power off when no
operation is made for about five minutes. To disable the auto
power off function, press the
[AUTO OFF] button again.
The “AUTO” at the upper right in the display disappears, and the
auto power off function becomes disabled.
Turning the power off
To turn the power off immediately, press the [ON/OFF] button.
℃
Ｍ
AX
℃
AUTO
