background image

Important Safety Information

Do not clean or operate a broken cooktop. If cooktop should break, cleaning solutions and 
spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a 
qualified technician immediately.
Clean cooktop with caution. If a wet sponge or cloth is used to wipe spills on a hot cooking 

area, be careful to avoid a steam cloud. Some cleaners can produce harmful fumes if 
applied to a hot surface.

Do not place hot cookware on cold cooktop glass. This could cause glass to break.
Do not slide pans across the cooktop surface. They may scratch the cooktop surface.
Do not let pans boil dry. This may cause permanent damage in the form of breakage, fusion 
or marking that can affect the ceramic-glass cooktop (this type of damage is not covered 

by your warranty).

Never leave surface units unattended at high heat settings. Boil-overs cause smoke and 

greasy spillovers that may ignite.

READ ALL INSTRUCTIONS BEFORE USE

SAFETY DURING USE



Always switch off the appliance before cleaning.

For safety reasons, do not clean the appliance with a steam jet or high-pressure cleaner.
Clean the cooktop in accordance with the maintenance and cleaning instructions in this 

manual.

Steam cleaner is not to be used for cleaning of the cooktop.
Do not use harsh abrasive cleaners or rough metal scrapers to clean the cooktop glass 

since they can scratch the surface, which may result in shattering of the glass.

SAFETY WHEN CLEANING




COOK MEAT AND POULTRY THOROUGHLY

CAUTION

 

DO NOT pick up the supplied bridge pan handles after cooking. They might 
be hot and there is a risk of burning yourself.

Cook meat and poultry thoroughly-meat to at least an INTERNAL temperature of 160°F and 
poultry to at least an INTERNAL temperature of 180°F. Cooking to these temperatures usually 

protect against foodborne illness.

— 7 —

Summary of Contents for AN-2402

























Reviews: