
4
SEVILLE LECTERN - CONTROL PANEL
MODEL SHOWN: LP-500
5
NEED MORE HELP? View demonstration videos on proper system setup and operation: www.anchoraudio.com
BASIC SYSTEM OPERATION
1. Position lectern in front of and facing the audience
2. Plug gooseneck/mic into the XLR jack located on the lectern top
3. Adjust microphone position
(use the supplied plastic stiffener to
help hold the mic in place)
4. Set the Lectern Mic Control
(blue knob) to minimum
5. Plug the system power cord into a standard AC outlet
6. Turn system Power Switch ON - the Power LED should light
7. Speak into microphone and adjust the lectern mic control to
desired volume level
8. Adjust Tone Controls for desired sound quality
NOTE: Elevate lectern when possible to project
sound over listeners in front.
* Please see Page 6 for detailed wireless instructions
IMPORTANT: Make all connections w/ shielded cables to avoid hum, buzzing or interference.
POWER SWITCH
AUXILIARY MIC INPUT
Balanced XLR - Low
impedance & phantom
power for condenser type
microphones
SPEAKER OUT
OUTPUT JACK
1/4” phone -
Use output to
drive an external
unpowered
8 ohm speaker
LINE IN - INPUT JACK
1/4” phone - for playback
of tape/CD players or any
audio source. May be
combined w/ mic inputs for
composite output
TONE CONTROLS
Bass & Treble
LINE OUT - OUTPUT JACK
1/4” phone - provides a
combined output of all active
system inputs. Record your
presentation or ‘daisy chain’
a powered sound system for
greater crowd coverage
WIRELESS
LEVEL CONTROL*
LINE INPUT
LEVEL CONTROL
AUXILIARY MIC
LEVEL CONTROL
LECTERN MIC
LEVEL CONTROL
READING LIGHT SWITCH
POWER LED
INTERNAL
SPEAKER
SWITCH
Turn built-in
speaker ‘On’
or ‘Off’
MIC OUT - OUTPUT JACK
Balanced XLR - a composite
signal of all inputs. Where
applicable, connect to the
input on your ‘house’ system
using an XLR cable
TRANSMITTER LED*
FREQUENCY
CODE LABEL*
FUSE
CARING FOR THE SEVILLE
Taking proper care of your new lectern will give you years of
use. Clean the solid wood trim with an oil-based furniture pol-
ish, and the laminate surfaces with common household polish.
SEVILLE LECTERN ACCESSORIES
LM-618 - LECTERN GOOSENECK MIC
Sensitive electret 24” gooseneck microphone
LC-650 - STORAGE COVER
Durable nylon fitted storage/dust cover
MIC-90 - HANDHELD WIRED MICROPHONE
Anchor’s dynamic, balanced, low impedance microphone w/
unidirectional pick-up pattern, mic “on/off” switch & 20’ cable