CONTENTS
GETTING STARTED ................................................................................................................................................. 2
SPEAKER FEEDBACK ............................................................................................................................................... 3
BASIC SYSTEM OPERATION ................................................................................................................................. 4/5
CARING FOR THE SEVILLE ...................................................................................................................................... 5
SEVILLE LECTERN ACCESSORIES ............................................................................................................................ 5
WIRELESS SYSTEM SETUP & OPERATION ............................................................................................................................... 6/7
HAVING TROUBLE W/ YOUR SOUND SYSTEM? ...................................................................................................... 8
SEVILLE TECHNICAL SPECIFICATIONS ................................................................................................................... 8
HAVING TROUBLE W/ YOUR SOUND SYSTEM?
CONDITION POSSIBLE
SOLUTION
No Sound
(Power LED OFF)
• turn POWER switch on; plug in power cord
• check for blown fuse
No Sound
(Power LED ON)
• turn up volume control of input used
• set INT SPKR switch to ON position
• make sure external speaker & all cables are completely plugged in
Feedback w/ Lectern Mic
• lower the mic volume control
• direct lectern away from reflective surfaces
• try adjusting tone controls
No Sound w/ Line Input
• check for output from source
• plug input cables completely in
HAVING TROUBLE W/ YOUR WIRELESS SYSTEM? (WIRELESS MODELS ONLY)
CONDITION POSSIBLE
SOLUTION
No Sound
(RX Indicator ON)
• set MUTE switch to on
(handheld mic only)
• turn up Wireless Level Control
• make sure mic is plugged into body pack transmitter
No Sound
(RX Indicator OFF)
• push mic power button
• turn Seville POWER switch on
• make sure transmitter power switch is on
• replace battery in transmitter
NEED MORE HELP? View demonstration videos on proper system setup & operation:
www.anchoraudio.com/seville.php
Anchor Audio, Inc.
Portable Sound Systems • Torrance, California
100-0064-000/C - 1/07
OWNER’S MANUAL
SEVILLE
LECTERN SOUND SYSTEM
ANCHOR AUDIO CUSTOMER SERVICE
888-444-6077
SEVILLE TECHNICAL SPECIFICATIONS
Rated Power Output
70W continuous
Max SPL @ Rated Power 107 dB @ 1 meter
Frequency Response
65 Hz – 15 KHz
AC Power Reqs.
110 – 125 Volts AC, 50/60 Hz
210 – 240 Volts AC, 50/60 Hz
(40 VA nominal, 120 VA max)
Speaker Type
6.5 inch woofer, high-output tweeter
Dimensions
(HWD)
49 x 24 x 21” / 125 x 61 x 53 cm
Weight
122 pounds / 55 Kg
Inputs
Lectern Mic
Lo-Z, balanced, phantom power, XLR
Auxiliary Mic
Lo-Z, balanced, phantom power, XLR
Line
Hi-Z, unbalanced, 1/4”-phone
Sensitivity For Rated Output
Microphone -52
dBV
(2.5 mVrms)
Line -14
dBV
(200 mVrms)
Outputs
Mic
(post fader)
Lo-Z, transformer balanced, XLR
Line
(post fader)
buffer isolated, 1/4” phone
Speaker
70W @ 4ohm, switched, 1/4” phone
(Specifications subject to change without notice)
