background image

3

10

Getting Started

Inspection and inventory of your system

Check unit carefully for damage which may have occurred
during transit. Each Anchor product is carefully inspected at
the factory and packed in a special carton for safe transport. 

Inventory

• PortaVox sound system (1 control unit & two speakers)
• MIC-50 Microphone
• RC-16 charging transformer (RC-16/220 for export)
• Warranty and registration card

All damage claims must be made with the freight carrier.

Notify the freight carrier immediately if you observe any
damage to the shipping carton or product. Repack the unit
in the carton and await inspection by the carrier’s claim agent.
Notify your dealer of the pending freight claim. 

Returning your unit for service or repairs

Should your unit require service, contact your dealer or our
Customer Service Department at (310) 784-2300 to obtain a
Return Authorization (RA) number. All shipments to Anchor
must include an RA number and must be shipped prepaid.

C.O.D. shipments will be refused and returned at your cost.

Warranty registration

Please fill out the warranty card and return it with a copy of
your invoice to Anchor’s Customer Service Department. This
will activate your limited two year warranty.

Save the
shipping carton
and packing
materials. They
were specially
designed to
ship your unit
safely.

SP-500 Companion Speaker Pack

Extends the coverage of your sound system—includes two
PortaVox speakers, cables, and a center storage unit.

SS-250 Speaker Stand

Adjustable stand made of black, anodized aluminum. Fits
PortaVox and SP-500 speakers.

VL-500 Storage Cover

Heady duty cover for PortaVox.

MIC-90P Handheld Microphone

Anchor’s dynamic, balanced, low impedance microphone
with a unidirectional pick-up pattern. Comes with a 20' cable
with 1/4”-phone plug and mic clip.

MSB-201 Microphone Stand and Boom

Microphone floor stand with 33" adjustable boom.

SC-50EX 50’ Speaker Cable Extension

Heavy duty speaker cable with a male 1/4" phone plug on one
end and female phone connector on other end.

Accessories

Summary of Contents for portavox







Reviews: