manualshive.com logo in svg

Anchor LOUNGER, Assembly Instructions Manual

Share
Download
Anchor LOUNGER Assembly Instructions Manual Download Page 3

Page 3 of 4

Assembly Instructions

LOUNGER BIFOLD FRAME

3A

Attach the Back Side Rails to the Back Deck.

The Back Side Rails have a Rounded end,

which assembles to the bottom Long Rail.

Using the Bolts and Barrel Nuts packed in this box,

attach the Back Side Rails to the Back Deck.

After tightening all the Bolts on Back
Deck, push fit or lightly tap the Wood

Buttons into the holes as shown.

See below for Assembly

of the Lounger Frame.

Helpful Tip:

deeper

Bottom:

Top

Mattress will sit on this 

surface (Surface with 

Sticker Indication)

3B

Fit Back Deck into Position. 

Insert the Back Deck lying flat. Insert one end first, then 
gently lower the other end into position.

CAREFUL!
These can

scratch the
Arms.

All four joints
must be left

LOOSE.

N&D-0209

Back
Side Rail

Top rail of Back Deck in the 
sitting position

60mm Bolts

Wood 
Buttons

60mm 

Bolts

Barrel Nuts

Sticker to indicate the

top of the Back Deck

Sticker to indicate

the bottom Long Rail

Barrel Nuts

Wood 
Buttons

Rounded end

THIS way

Rounded end

THIS way

THIS END

FRONT

Summary of Contents for LOUNGER







Reviews:

No comments

Brands by name

Popular brands

Load more brands