MADE IN USA
SIX YEAR WARRANTY
Bigfoot® Sound System Owners Manual
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
BIGFOOT TECHNICAL SPECIFICATIONS
(Specifications Subject to Change Without Notice)
ANCHOR AUDIO CUSTOMER SERVICE
800.262.4671
FOR ADDITIONAL INFORMATION
visit www.anchoraudio.com
HAVING TROUBLE WITH YOUR SOUND SYSTEM?
CONDITION
POSSIBLE SOLUTION
No Sound
(power LED off)
• turn POWER switch ON
• charge battery or plug in AC cord
• if unit overheats it goes into “protection mode”,
turn it off, lower volume, then turn back on
No Sound
(power LED on)
• check for output from source
• make sure all cables are completely plugged in
• turn up volume control of input used
Shortened Battery Life
• charge battery fully; if battery life continues to deteriorate,
contact Anchor Audio customer service: 800.262.4671
Distorted Sound
• lower system volume control
Excessive Hum or Noise
• use shielded cables
• use balanced microphone
HAVING TROUBLE WITH YOUR WIRELESS SYSTEM? (Wireless Models Only)
CONDITION
POSSIBLE SOLUTION
No Sound
(RX Indicator: ON)
• set MUTE switch to on
(handheld mic only)
• turn up WIRELESS volume control
• make sure mic is plugged into body pack transmitter
No Sound
(RX Indicator: OFF)
• push mic power button ON
• turn Bigfoot POWER switch ON
• make sure transmitter power switch is ON
• set receiver and transmitter to same channel
• replace battery in transmitter
NEED MORE HELP? Bigfoot Sound System Setup & Operation Videos!
Visit Our Website: www.anchoraudio.com
13
Rated Power Output
400 Watts AC/DC
Max SPL @ Rated Power
130 dB @ 1 meter
Battery
Three 12 V rechargeable, 9.0 Ah
Full recharge: approx 8 hrs
Frequency Response
100 Hz – 15 kHz ± 3dB
Line Output (post fader)
isolated, 600
W
, 1/4” phone
AC Power Reqs.
100 – 240 VAC, 50/60 Hz, 300W max
USB Power Out
5V 500mA
Dimensions Closed (HWD) 42.3” x 15.3” x 24.0” (107 x 39 x 61cm)
Dimensions Opened (HWD) 68.6” x 15.3” x 24.0” (174 x 39 x 61cm)
Weight
75 lbs / 34 Kg
Microphone Inputs:
Lo-Z (1 K
W
), balanced, XLR
12 VDC condenser mic (phantom) power
Hi-Z (10 K
W
), unbalanced, 1/4” phone
Line In
balanced, 1/4” & 1/8” stereo
Sensitivity For Rated Output
Lo-Z Microphone
-52 dBV (2.5 mVrms)
Hi-Z Microphone
-43 dBV (7.5 mVrms)
Auxiliary (line)
-14 dBV (200 mVrms)
Anchor Audio only warranties products sold by authorized Anchor Audio dealers.
Anchor Audio is unable to repair products that are out of warranty. Please visit
the Anchor FAQ page at http://www.anchoraudio.com/anchor-faq.html for more
information on battery replacement options.
To locate an authorized dealer near you, please contact [email protected].
Anchor Audio products are warranted to be free from defects in materials and
workmanship for the period of SIX (6) YEARS from the date of original purchase
unless listed below:
1. All microphone and beltpack transmitters shall be warranted for a TWO (2)
YEAR period.
2. Batteries shall be warranted for a TWO (2) YEAR period.
3. PortaCom and ProLink 500 headsets and beltpacks shall be warranted for a
TWO (2) YEAR period.
4. All woodworking shall be warranted for a TWO (2) YEAR period.
5. CouncilMAN and Assistive Listening Systems shall be warranted for a TWO
(2) YEAR period.
6. All cases and covers shall be warranted for a TWO (2) YEAR period.
Anchor Audio Warranty