4
MANPOWER REQUIRED
Six experienced installers
should be able to assemble a
59’ x 99’ tent in approximately
six hours.
TOOLS REQUIRED
Sledge Hammers
Stake Driver
2 Measuring Tapes
Paint or Chalk for Marking pole & stake locations
INSPECT SITE
Caution:
Consult your local utility locator service or the
National Utility Locating Contractors Association
(NULCA) prior to installation. Prior to actual
tent assembly, be sure to look up, down, above
& below for obstacles, pipes, wires, trouble, etc.
LAYOUT & CHECK
Utilize parts list for a quick I.D. and a check list
to ensure that you have all the parts.
Parts Illustrations
IMPORTANT:
The installation of this Tent should be performed/supervised by knowledgeable tent installers with a clear
understanding of safety issues as well as the methods of anchoring. The installer/owner must read the assembly
instructions completely prior to any installation. Particular attention must be given to anchoring! See Caution
Statement on back page of this manual.
4’-0” Stake Bar
2’-0” Stake Bar
Bag with Fabric
Section
Installation Layout Cable
Part of Installation Kit
(Req’d for first purchase,
optional after that)
Center Pole
Side Pole
42” Double Head Stake
Flag (optional)
Pole Cap (optional)
Winch Tool
Winch Tool
Web Guy for
Winch w/Plate
W
W
W
W
W
We
W
W
W
W
W
W
W
W
W
b Guy for
Winch w/Plate
Used with Stake Bars
Aurora Web Guy Assembly
(Web guy & Ratchet)
