10
Aurora Flag Pole Installation Instructions
STEPS
Flag pvc Assembly
Collar with knob
set screw.
Collar traps flag
pole on tent.
Properly Installed Flag Pole
Top holes of tent fabric at
lace. (cut away for clarity)
Flag pole.
Center Pole.
Knob with set screw to
hold flag pvc assembly
onto pole.
1.
Fit center pole holes of mating fabric pieces together and lace a couple of holes each side.
2.
Underneath tent, slide flag pole up thru both top hole rings.
3.
Slide collar with knob set screw down over flag pole - this will sit on top of top hole rings.
4.
Tighten knob set screw onto flag pole until snug so flag pole cannot slide back thru tent pole holes.
5.
Slide flag PVC assembly down over top of flag pole.
6.
Insert top knob into top hole of pvc assembly and screw until snug.
