Copyright © 2015 Shenzhen ANB Technology Co., Ltd. All rights reserved.
7.2 Control function SMS Commands
7.2.1 Enable Engine Immobilizer
Function
SMS Command Format Device Reply SMS
Enable Engine
Immobilizer
*UPWD*stop #
Immobilizer Enabled;
$GPRMC,xxxxxx.xxx,A,xxxx.xxxx,N,xxxxx.xxxx,E,x.x,xxx.x, xxxxxx,,,A*xx
Note:
-
For safety reason, this functions as: In first 3minutes, device cut engine 1s and then release
for 2seconds as recycle. After 3minutes, it will cut the engine completely.
-
Danger Command, Be careful to use.
7.2.2 Disabled Engine Immobilizer
Function
SMS Command Format Device Reply SMS
Disable Engine
Immobilizer
*UPWD*K #
Immobilizer Disabled;
$GPRMC,xxxxxx.xxx,A,xxxx.xxxx,N,xxxxx.xxxx,E,x.x,xxx.x, xxxxxx,,,A*xx
This command will execute immediately.
7.2.3 Remote reboot Device
Function
SMS Command
Format
Device Reply SMS
Remote Reboot
Device
*UPWD*Z #
Reset Ok;
$GPRMC,xxxxxx.xxx,A,xxxx.xxxx,N,xxxxx.xxxx,E,x.x,xxx.x,
xxxxxx,,,A*xx
After device receives this command, it will reboot itself. This command is only used for when
device functions not as expected.
7.2.4 Remote activate Alarm buzzer to sound
Function
SMS Command Format
Device Reply SMS
Remote Sound Alarm buzzer *UPWD*L #
NO SMS response
After device receive this command, the alarm buzzer will sound for 15seconds.
7.2.5 Remote activate GPRS login forcibly
Function
SMS Command Format
Device Reply SMS
Login GPRS forcibly
*UPWD*GPRSON #
GPRS Enabled.
Example Command:
*1234*GPRSON#
