2:2 Brakes - Rear wheels
The frame has a central brake pedal that locks
both wheels.
To lock the wheels - Press the front of the pedal
To unlock to wheels - Press the back of the pedal
2:1 Folding and unfolding
The chassis is easy to fold and unfold.
Unfolding - Grab hold of the padded handle and lift so that the undercarriage rises and make
sure that the locking sleeves snaps into place.
Folding - Stand behind the chassis and pull the lock-handle for folding upwards.
Push forward and downwards.
Make sure that the locking sleeves lock properly!
Be careful to avoid risk of pinching in the moving parts.
You shall ALWAYS lock the wheels
when you leave your Zitzi Wave on an
uneven surface.
!
3
3:2 Tilt the seat
Quick-release Lock-handle
- Release the lock-handle on the left side
- Pull the quick release on the right side and adjust the angle of the seat.
- Note that the quick-release ”clicks” and locks the seat plate.
- Tighten the lock handle
3:1 Direction lock
Locking the direction of travel:
- Twist the knob 90 degrees.
- Push the undercarriage forward so that the
wheels straighten up and the lock snaps in
position.
- Check the knob so that it is tight against the
pipe and that the locking shaft has entered the hole.
Unlocking the direction of travel:
- Pull the knob up and twist it 90 degrees.
- Release the knob so that the ground cut-outs
hook up on the pipe.
- Check that the direction lock is properly unlocked.
3:3 Angle adjustment, driving bow
Knob (A)
- Loosen the knob (A)
- Adjust to desired angle
- Tighthen the knob
Accessories, X-long driving bow
Will replace standard driving bow.
!
Make sure the seat is locked!