11
User manual Zitzi Flipper Pro Flex
www.anatomicsitt.com | +46 11 16 18 00
Mounting of anti-tippers & step bar
The anti-tipper and step bar are mounted with common
supplied screws, nuts and washers as shown.
The step bar is place in the outside and the anti-tipper on
the inside of the hole plate.
Anti-tipper - Quick guide
The anti-tipper is used for preventing the
chassis from tipping uncontrolled backwards.
The anti-tipper can easily be folded away in
order to be out of the way.
Step down the anti-tipper and turn it aside.
Make sure to rotate it until you hear a click
indicating that it is locked away. Try to step
as far in as possible on the anti-tipper. This is
because the parts will have a longer lifetime.
Opposite the anti-tipper folds out until a
click is heard.
Direction latch
To activate the castor wheel direction latch; pull
the snap lock at the castor wheel and turn 90°.
The snap lock fastens automatically to the cor-
rect position.
anti-tipper
Step bar
C
C Holes for anti-tipper
and step bar
Note!
Zitzi Flipper Pro Flex should
always be equipped with anti-tip
device given its high potential for
height adjustment
Step bar - Quick guide
The Step bar is used to facilitate raising the
front wheels of the chassi, for example at
sidewalks.