Analytik Jena CyBio Well vario OL3381-25-300, Operating Manual

Page: 46 / 164

30 Release: 2017 CyBio
®
Well vario
Technical Description
4.2.5 Capillary head
The capillary head includes a magazine holder for capillary magazines. The clamping
motor fixes a capillary magazine. The capillary head also provides a terminal for connec-
tion of the air supply tube (
→
see fig. 12 ,
→
item 5 ). A jet of compressed air is applied
to completely dispense a previously aspirated amount of liquid into a microplate. A gas-
ket is provided at the bottom of the head to prevent lateral emergence of compressed
air above the capillary magazine.
The capillary head can be quickly and easily replaced, either from the system front side
(front side) or its rearside (back side), depending on the particular product version (
→
see fig. 12 ). For convenient removal from, or insertion into the system, the capillary
head has a special handle. In addition, a recessed handle in the magazine adapter can
be used as further aid. Rails mounted to the lateral sides of the capillary head provide
for guided motion during removal or installation of the head. For replacement of the
capillary head,
→
refer to page 85 .
Optionally available capillary magazines are:
Table 6: Available choice of capillary magazines
Fig. 12: Capillary head with magazine adapter
Capillary magazine Volumes
96 or 384 capillaries 25, 50, 100, 250, 500, 750, 1000 nL
1 Rail
2 Handle
3 Capillary head
4 Magazine adapter
5 Compressed air supply tube
6 Terminal connector
5
3
2
1
4
6