Analytik Jena CyBio Well vario OL3381-25-300, Operating Manual

Page: 41 / 164

CyBio
®
Well vario Release: 2017 25
Technical Description
4.2 Component Description
4.2.1 Basic Unit
The basic unit contains four motors with functions as follows:

Positioning motion of microplate in X- and Y-direction (2 motors)

Lifter motion:
– Raising a microplate into position under the pipetting head
– Transferring a microplate into position under the pipetting head in X- and Y-
direction as appropriate for a given microplate type (2 motors)
– Placement of a microplate onto the carriage or rotary table (initial position)

Carriage motion in horizontal direction along the transport rails or rotary motion
of rotary table in horizontal direction
System version for head replacement from the front
The main switch for turning system power on and off is located on the front of the ba-
sic unit (
→
see fig. 28 ).
System version for head replacement from the back
The main switch for turning system power on and off is located on the back of the basic
unit (
→
see fig. 29 ).
4.2.2 Operation Control Panel
The CyBio
®
Well vario multi-channel pipettor may be connected to the operation con-
trol panel for working in manual mode. The various control panel elements are shown
in
→
Fig. 9 .
Available functions are:

Horizontal and vertical microplate motion

Selection of menu functions

Entries for pipetting volume
NOTE
Zero-position is correctly positioned as part of a system initialization routine.