Sub MkIIP Oxygen & Carbon Dioxide Monitor
User Manual - US Navy Version
Document Ref
: AS2-802-14 -
January 2016
Page 13
7.2
Data logging program overview
The data logging program is split into a number of pages or tabs. These are Instrument
Comms, Instrument Status, Preview Graph and Instrument Setup as shown in the diagram
below.
Instrument Comms appears during the installation process, the Instrument Status, Preview
Graph and Instrument Setup pages are used during data logging set up, activation and data
retrieval. The ‘Preview Graph’ is a small utility, allowing you an overview of the data that has
been logged. It is not intended to replace the need for a spreadsheet. To use the graph
select the variable that you wish to view and a graph will be automatically generated. This
process will suspend
logging; you will therefore need to click on the ‘Restart logging’ button
on the Instrument Status page.
The Instrument status page provides a summary of the instruments data logging status and is
shown in the diagram on the previous page. This page shows the Memory status of the SUB
MkIIP. The Information Panel to the right of the screen shows us the current status of the
instrument. The instrument has been configured to ignore new data when the memory is full.
The instrument is recording all parameters (Oxygen, carbon dioxide, depth and temperature)
at 5 minute intervals. All of these features are configurable on the Instrument Setup page.
The 5 command buttons will be explained in Section 7.3.
7.3
Data logging configuration
Click on the ‘Instrument Setup’ tab and the following screen will appear.
