Analogue Solutions | TREADSTONE | Manual
Filtering External Sound Sources
External sound sources, such as vocals, guitars, mixer sends,
samplers, etc. can be sent through the filter for extra treatment.
Note, mic's and guitars may need pre•amping if the signal is too
quiet.
Simply plug the sound source into one of the front panel mixer input
socket.
Note: the Audio in shares an input channel to the filter with the audio
from the Noise / Sub switch. You may want to centre this switch to
Off to better hear external audio.
VCA
The VCA - this is an analogue circuit allows you to alter the audio level of the synthesizer.
Typically the last circuit in the audio chain.
MODE switch
Switch left routes MIDI Gate to VCA level.
Switch right routes the Envelope to VCA level.
Centre is off! In this position you will get no
audio output from Treadstone! (Except maybe
the tail end of the echo.)
The switch needs to be set to EG (right) to hear various EG retrigger effects take place.
Treadstone - 4 Dec 2017
| Page
!
18