analogue solutions
Semblance/Telemark
e&oe (c) 5-3-09
26
To Set MIDI Receive Channel
Press and hold the Program button. Then do either;
Press a MIDI key. This will set and store the receive channel to the channel received
in the note data.
CV2 will set itself to Velocity.
Release the Program button.
Or
Move a Continuous Controller. This will set and store the receive channel to the chan-
nel received in the CC data.
CV2 will set itself to the CC number received.
Release the Program button.
Note; The Program button must be held in whilst pressing a key or moving a control-
ler.
CC number 7Fh is reserved. Avoid using this controller.
