SMART BOOSTER™ Chapter 2 : INSTALLING
PAGE 5
Chapter 2 :
INSTALLING
2-1.
TABLE TOP MOUNTING
The SMART BOOSTER
™
can be used directly on a table. The unit is delivered with 4 plastic feet.
2-2.
RACK MOUNTING
The SMART BOOSTER
™
is compatible with a 19" enclosure. Please follow the instructions below to install the
SMART BOOSTER
™
into a 19” rack:
•
Screw the supplied 19" brackets to the sides of the SMART BOOSTER
™
.
•
Put the SMART BOOSTER
™
into the rack.
NOTE: The 19" front panel screws are not included.
•
Be sure that no weight is added on the SMART BOOSTER
™
in excess of 2 kg (4.4 lbs.).
•
The maximum ambient operating temperature must not exceed 40 °C (104 °F).
•
The rack and all mounted equipment in it must be reliably grounded to national and local
electrical codes.
2-3.
STARTING
Note : All devices must be OFF before connecting.
c
Connect the AC Power Cord to the rear of the SMART BOOSTER
™
and to a power outlet.
d
Connect your Video & Computer Sources to the INPUTS.
e
Connect your corresponding Video / Data Display Devices (TV, VCR, Data Projector, Plasma Screen, LCD
Screen, ….) or SMART CUT 2
™
to the OUTPUTS (up to 3 for each Input).
f
Turn ON your Display Devices and all of your Input Sources.
