The
Pulse LE
front panel is comprised of several sections, each carefully labelled and self
explanatory, corresponding to all of the machine’s versatile functions.
The STANDBY button (1) will allow users to turn the device on and off once the main outlet switch
(14) is turned on. The menu screen (2), and Control section (3), menu scroll knob (4) will give users
access to the
Pulse LE
menu. The Layer Selection section (5) will allow users to select which source
the
Pulse LE
will work on, while the PIP (7), and Background Live (9) buttons, determine which of
the 10 available input sources will be used in that layer. The FREEZE button (8) allows users to take
a snapshot of the displayed image, and the TAKE button (11) will display your Preview Screen to
the Main outputs (20).The EFFECT button (10) and the PRESET button (6) are both shortcuts to the
Pulse LE
menu
Presets
page.
The rear panel of the
Pulse
will let you connect all your input sources and outputs to your device.
Plug universal analog sources (17), DVI-I sources (18) and HD-SDI sources (19) to your
Pulse LE
.
Connect audio inputs and outputs (21 and 22), and a remote controller to the IP/LAN connector (16).
Plug displays to the Main and Preview outputs (20).
QUICK START
What’s in the box
Pulse LE Overview
Thank you for choosing
Analog Way
and the
Pulse LE
. By following these simple steps, you should
be able to setup and use your powerfull scaler/switcher within minutes. Discover the
Pulse LE
extensive capabilities and intuitive interface while configuring your first show, and unleash your
creativity for a new experience in show and event management by
Analog Way
.
Pulse LE -
PLS200
1 x
Pulse LE
seamless scaler/switcher
1 x Power supply cord
2 x DVI male to HD15 female and DVI female cable
1 x HD15 to 5 BNC cable
1 x Ethernet crossover cable
1 x Set of 3 audio 5 pin screw terminals
1 x RCS CD-ROM (PC only)
1 x User manual CD-ROM (Mac and PC)
1 x Quick Start guide
4 x M4x12mm screws
WARNING!
If required, front handles of the device can be dismantled,
but with caution.
The original screws removed must not be reintroduced to
their location without handles in place.
Substantial damages can occur, including risk of electric
shock from the mains voltage
.
Only
M4x12mm
screws can be used.
(They are supplied with the unit)
