OCTO-QUATTRO™
Chapter 7 : CONTROL SOFTWARE (continued)
PAGE 21
7-3. COMMUNICATION SETUP (continued)
•
CASE OF LAN PORT:
- With the LCD menu of the OCTO-QUATTRO
™
device, verify the configuration of the LAN communication
port (
CONTROL > LAN setup
), then activate the LAN communication port (
CONTROL > RS232/LAN port
> LAN
).
- With the
Controls
menu of the software, select
RS232/LAN setup,
and
LAN Setup
. Then configure the
Local
port
, the
Remote IP address
and the
Remote port,
and click on
Apply
to setup the new values. The software
will also display
Device connected
.
NOTE
: To verify the LAN status of your OCTO-QUATTRO
™
device, select
OCTO LAN status
in the
Controls
menu.
7-4. USING THE SOFTWARE
c
Click on the
Input
tab and select the
Signal
Type
for each input.
Then, if
needed make the others adjustments
(video
Standard
...)
and disable the unused inputs (
Used
section).
