OCTO
²
/ QFX402
Chapter 5 : FRONT PANEL DISPLAY MENUS DESCRIPTION (continued)
PAGE 27
5-5. FUNCTIONS DESCRIPTION
1 [SWITCHING] +
ENTER.
1-1 [Fast switching] +
ENTER.
Select an item with
+
ENTER.
•
[Internal rate]
: The output frame rate is 60 Hz or 75 Hz depending of the selected output format. A higher
frame frequency gives a better visual aspect when displaying static pictures.
•
[Follow # x]:
The output frame rate is identical to the selected input Frame Rate: 50 Hz if the input video
standard is PAL or SECAM and 59.94 Hz if the input video standard is NTSC. This function
allows improving the motion pictures.
1-2 [Samless] +
ENTER.
Select the computer input take as reference with
+
ENTER.
•
[Seamless #1]:
The device is in
Seamless mode
. The output format & rate are the same as computer #1.
•
[Seamless #8]:
The device is in
Seamless mode
. The output format & rate are the same as computer #8.
2 [INPUT] +
ENTER.
2-1 [Auto settings] +
ENTER.
This function detects automatically the input type of each source connected to the inputs.
2-2 [Input status] +
ENTER.
Indicates the status of the selected input.
2-3 [Input type] +
ENTER.
c
Select an input with
+
ENTER.
d
Select the input signal type with
+
ENTER
between:
•
[SDTV Composite]
•
[SDTV RGB SOG]
•
[SDTV S.VIDEO]
•
[SDTV RGBS ana.]
•
[SDTV YUV]
•
[Computer SOG]
•
[SDTV RGBS TTL]
•
[Computer HV/C]
•
[Computer DVI]
•
[HDTV]:
HDTV input format (720p, 1035i and 1080i).
•
[Audio only]:
Select this function if you only want to connect an audio source (no video signal needed).
e
Then for
[SDTV Composite]
, and
[SDTV S.VIDEO]
, select the video standard with
+
ENTER
between:
•
[NTSC / PAL / SECAM]:
automatic NTSC, PAL, and SECAM standard detection.
•
[NTSC]:
NTSC standard detection only.
•
[PAL]:
PAL standard detection only.
•
[NTSC 4.43 60 Hz]:
NTSC 4.43 60Hz detection
.
•
[PAL 4.43 60Hz]:
PAL 4.43 60Hz detection
.
•
[SECAM]
: SECAM standard detection only.
•
[B & W 50/60 Hz]:
Black and White detection.
2-4 [Used input] +
ENTER.
Select an input and then select an item
+
ENTER
between:
•
[Used]
: A signal is connected to the input.
•
[Unused]:
No signal is connected to the input. The input is unused.
2-5 [H sync load] +
ENTER.
Select for each input the load of the H Sync. with
+
ENTER.
2-6 [VCR mode] +
ENTER.
This function allows improving the image contour of low quality VHS tapes. Select
[on]
with
ENTER.
2-7 [VIS] +
ENTER.
This function allows defining the sources which are synchronized together (external genlock). The synchronized
sources can be seamless switched between themselves. This switching mode is called VIS (Vertical Interval
Switching)
.
