Chapter 1 : INTRODUCTION (continued)
OCTO
²
/ QFX402
PAGE 10
1-6. OCTO
²
FRONT PANEL DESCRIPTION
•
OCTO-FX
²
(OFX803)
ANALOG WAY
•
OCTO-FADE
²
(OFD803)
ANALOG WAY
•
OCTO-PLUS
²
(OCP803)
ANALOG WAY
INPUT #8:
Universal (computer and video) input. This input accepts the following sources:
AUDIO L+R:
Audio stereo source on jack 3.5 female connector.
COMPUTER/TV/HDTV: Computer (RGBHV, RGBS or RGsB) or video (SDTV or HDTV) source on a HD15
female connector.
S.VIDEO:
S.VIDEO (Y/C) source on 4-pin mini DIN 4 female connector.
C.VIDEO:
Composite Video (PAL, NTSC...) source on a RCA female connector.
Fn
(OFX803 only)
:
Secondary function selection button.
BLACK
(OFD803 only)
:
Allows to display a black screen.
EFFECT PRESET :
Selection of the CUT, FADE & TITLE effects.
(OFX803 & OFD803)
FREEZE :
Freeze the output (the blinking LED indicates the FREEZE is active).
LOGO
(OFX803 only)
:
Allows to display logo onto the output.
NOTE:
Logo display can be used only when Fn is activate.
INPUT SELECTION:
•
Selection of the 8 input sources: 1 to 8.
•
Selection of the 4 frames: F1 to F4
(OFX803 only)
.
NOTE:
-Frame selection can be used only when Fn is activate (LED blinking quickly).
-The source/frame displayed onto the output is indicate by a turn ON LED.
•
A long push (1 second) on the selected input button allows to active the
BLACK
function. A black screen is displayed onto the corresponding output. A short push on the
same button allows to inactive this function.
CONTROL
Allows to scroll thru the different menus (in Control mode).
EXIT - MENU:
Switches between Status and Control mode.
ENTER:
Validates a selected item.
