OCTO
²
/ QFX402
Chapter 4 : USING FRAME STORE AND LOGO INSERTION
PAGE 23
4-2. USING THE FRAME STORE
This function allows memorizing up to 4 frames (images) in order to display it at any time during the show.
IMPORTANT
: The output format used when displaying the frame should be the same that the output format used during
the FRAME storing.
•
HOW TO STORE A FRAME:
c
Select the source of the frame to be stored (with the INPUT SELECTION buttons).
d
Select the
Record frame
mode (
LOGOS/FRAME > Record frame
): the device displays a white rectangle
corresponding to the frame selection area onto the output. If necessary adjust the position and size of the frame
selection area (
IMAGE > Pos settings
).
e
Store the frame (
LOGOS/FRAME > Record frame > Store
). The memorization starts and will take about 2
minutes.
NOTE:
For motion picture, you can use the FREEZE function, before doing the memorization.
•
HOW TO DISPLAY ON or OFF the FRAME:
f
To display ON the FRAME, select a Frame selection button of the front panel (
Fn
then
F1
,
F2
,
F3
or
F4
).
g
To display OFF the FRAME, select an input selection button.
