Chapter 7 : TECHNICAL SPECIFICATIONS (continued)
BROAD SCAN (HD/SDI)
PAGE 36
7-2. VIDEO OUTPUTS (continued)
•
SDI LUMA KEY*
Connector:
BNC female (x2)
.
Format:
Same format as the output.
Impedance:
75
Ohm.
•
HD-SDI LUMA KEY (available on BHD930 models only)
Connector:
BNC female (x2)
.
Format:
Same format as the output.
Impedance:
75
Ohm.
* Available on the BSD830 & BHD930 models only.
7-3. ANALOG GENLOCK (MODELS: BHD930-AG, BSD830-AG & BSC730)
Connectors:
2 BNC female
.
Input signal type:
Black Burst (PAL or NTSC) or 3-level HD black.
Impedance:
75
Ohm.
Output:
Active
loop-through.
7-4. DIGITAL GENLOCK (MODELS: BHD930-DG & BSD830-DG)
Connectors:
2 BNC female
.
Input signal type:
SD/HD-SDI
Black.
Impedance:
75
Ohm.
Output:
Active
loop-through.
7-5. COMMUNICATION PORTS
•
RS-232
Connector:
DB9 female
.
Data Rate:
9600 Bauds, 8 data bits, 1 stop bit, no parity bit, and no flow control.
Pin-out
:
•
LAN (Optional)
Connector:
RJ-45 female
.
Protocol:
TCP (Transmission Control Protocol)
UDP (User Datagram Protocol).
Data Rate:
10 / 100 Mbps.
LED functions (on RJ45 connector):
Left LED
Right LED
Meaning
OFF
OFF
No
link
OFF
ON
100 BASE-T link.
ON
OFF
10 BASE-T link.
PIN #
FUNCTIONS
2
Tx (transmit data to the control device)
3
Rx (receive data from the control device)
5 GROUND
(Gnd)
8
Reserved for manufacturer.
DB9 connector
