Chapter 2 : STARTING (continued)
BROAD SCAN (HD/SDI)
PAGE 16
2-2. SETTINGS
c
We recommend resetting the BROAD SCAN to all of its default values, with the front panel display
menu
(
CONTROL
default value
yes
) before proceeding.
d
Select the auto-setting menu with the front panel display
menu (
INPUT
Auto setting
) and activate this function
with ENTER. This function detects automatically the input type of the source connected to the input connectors
(DVI & RGB). Then the device performs an auto-centering function.
e
Select the Input status menu
(INPUT
Input status
) to verify the correct detection of the type and format of your
input source. If a wrong message is displayed, select manually the type of your input source (
INPUT
Input
Type
).
f
Select the output format and rate (
OUTPUT
Format
).
g
For SDTV output format (PAL, NTSC) select the type of the RGB/YCrCb output
(
OUTPUT
Type
).
2-3. IMAGE ADJUSTMENTS
c
Select the UNDER/OVER scan mode with the front panel button.
d
Adjust the position & size of the image with the front panel buttons.
e
Adjust the level of anti-flicker with the panel display menu (
IMAGE
Flicker filter
).
f
Perform the others adjustments, available in the Image menu.
2-4. EMBEDDED AUDIO MODE
The embedded audio menu is available for BHD930 & BSD830 models only. The device allows embedding analog
audio stereo signal into the HD/SD-SDI output signals.
c
Connect an analog audio stereo source to the AUDIO IN (L /R) connector.
d
Activate the Embedded audio mode with the front panel display menu (
AUDIO
Embed.
ON
).
e
Adjust the audio level with the front panel display menu (
AUDIO
Level
).
f
Adjust the audio balance with the front panel display menu (
AUDIO
Balance
).
