Analog Devices UG Series, User Manual

Page: 8 / 36

UG-XXX Evaluation Board User Guide
EVALUATION BOARD SOFTWARE
SOFTWARE INSTALLATION PROCEDURES
The EVAL-AD7124-8SDZ evaluation kit includes a CD
containing software to be installed on your PC before you begin
using the evaluation board.
There are two parts to the installation:
•
AD7124-8 evaluation board software installation
•
EVAL-SDP-CB1Z system demonstration platform board
drivers installation
Warning
The evaluation software and drivers must be installed before
connecting the evaluation board and
EVAL-SDP-CB1Z board to
the USB port of the PC to ensure that the evaluation system is
correctly recognized when it is connected to the PC.
Installing the AD7124-8 Evaluation Board Software
To install the AD7124-8 evaluation board software,
1.
With the EVAL-SDP-CB1Z board disconnected from the
USB port of the PC, insert the installation CD into the CD-
ROM drive.
2. Double-click the setup.exe file to begin the evaluation board
software installation. The software is installed to the
following default location:
C:\Program Files\Analog
Devices\AD7124-8 .
3. A dialog box appears asking for permission to allow the
program to make changes to your computer. Click
Yes .
Figure 4. AD7124-8 Evaluation Software Installation:
Granting Permission for the Program to Make Changes to Your Computer
4. Select the location to install the software, and then click Next .
(Figure 5 shows the default locations, which are displayed
when the window opens, but you can select another location
by clicking
Browse .)
Figure 5. AD7124-8 Evaluation Software Installation:
Selecting the Location for Software Installation
5. A license agreement appears. Read the agreement, and then
select
I accept the License Agreement and click Next .
Figure 6. AD7124-8 Evaluation Software Installation:
Accepting the License Agreement
Rev. PrA | Page 8 of 36