Evaluation Board User Guide
UG-435
Rev. 0 | Page 3 of 20
QUICK START GUIDE
Follow these steps to quickly evaluate the
ADF4351
device:
1.
Install the ADF435x software from the CD.
2.
Connect the
EVAL-ADF4351EB1Z
to the PC and install
the necessary drivers.
3.
Follow the hardware driver installation procedure.
4.
Ensure that Switches SW1 and SW2 are closed.
5.
Run the ADF435x software.
6.
Select the USB board connection and the
ADF4351
device
in the
Select Device and Connection
tab of the software
front panel window.
7.
Click the
Main Controls
tab. Update all registers.
8.
Connect the spectrum analyzer to J2.
9.
Measure the results.
