Evaluation Board User Guide
UG-396
Rev. 0 | Page 7 of 16
OPERATING THE SOFTWARE
The main window of the
EVAL-AD5246DBZ
software is divided
into the following sections:
RDAC
and
MANUAL DATA
.
RDAC
WRITE
can be used to update the RDAC registers by entering a
desirable value into the text box and clicking
WRITE
. When
WRITE
is clicked, a write/read operation is performed, and the
value displayed in this section is updated with the actual RDAC
register value. This function can be used to verify whether the
write operation was completed successfully.
MANUAL WRITE
SEND DATA
is a customized I
2
C data-word can be sent by
manually switching the scroll bars from 0 to 1 or from 1 to 0 as
desired and then clicking
SEND DATA
.
In addition, the scroll bars are updated on each write transfer,
showing the command sent to the part.
EXIT
closes the program.