Evaluation Board User Guide
UG-160
Rev. B | Page 5 of 16
EVALUATION BOARD SOFTWARE
is provided on
the CD included in the evaluation board kit. To install the
software, see the
user guide,
PLL Software Installation
Guide
.
To run the software, click the
Int-N v7
file on the desktop or
select the file from the
Start
menu.
On the
Select Device and Connection
tab, choose the device
and connection method, and then click
Connect.
Confirm that
Analog Devices RFG.L Eval Board connected
is
displayed at the bottom left of the window (see Figure 3). If this
message is not displayed, the software cannot connect to the
evaluation board.
Note that when the board is connected, there is about a 5 sec to
10 sec delay before the status label changes.
From the
File
menu, the current settings can be saved as and
loaded from a text file.
09145-
017
Figure 3. Int-N Software, Main Window—Select Device and Connection
